?? Work at Pickup Points � Flexible schedule

Build Your 100% Virtual CCIE Enterprise v1.1 Home Lab With Cisco CAT9KV And DNAC

Terry Vinson CCIEx2 11 views

Download Video

Comments

Thanks for the video,brbrI did a lot of tests and we won't be able to run LAN automation, as the ESXi only supports an MTU of 9000 max Due to the EVE-NG and ESXi limitations, it will stop pushing the is-is configuration because DNAC will change mtu over 9000 to the cat9kvbrBut you still can deploy SD-Access Fabric using PnP, you can manually set up the underlay network and DNAC is able to connect the device that you are planning to join the fabricbrbrJust FYI, VXLAN and LISP require an MTU greater than 1500 You need to SSH into EVE-NG and change the network card MTU to 2000-8500 (eg, root@eve-ng:# ifconfig eth1 mtu 8500), as well as adjust the ESXi vSwitch MTU After making these changes, you will be able to experiment with SD-AccessbrGood luck
Comment from : @chocolate019

Thanks, Terry, can you please confirm, are we able to deploy isis in fabric in this virtual CAT9k or do we need to manually configured to build lisp routing?
Comment from : @mohammedsanaullah2103

Are these switches pre-configured with ISIS routing protocol
Comment from : @adnanmuhammad-j1f

amazing, please suggest about this cat9kv-prd-171201prd9 image is suitable for virtual fabric ?
Comment from : @kulwinderkailey1166

Hi Terry,brthanks for the videobrwhich processor do you run to get the 80 core please if you give it to me in details :)
Comment from : @omerabdalaziz936

Hey Terry, Great Channel, I don't know how you resolved the mtu size on cat 9kv, as its supported size range is(1500-8978) dnac alway push the jambo size 9100? this can create lots of problem?
Comment from : @dawoodnigarish

Hi Terry how you can get 80 CPU to run everything? E5-2699V4 or higher??
Comment from : @sleick20

hi terry - how to get and install dnac thx
Comment from : @alaindeleon2220

Hey Terry, thanks for sharing this Which servers model and spec do you recommend for this 100 virtual LAB?
Comment from : @satekhi2349

can you send me the Catalyst 9K virtual switch image Link?
Comment from : @omvirprasad3560

Thanks Terry for great Video, i am using the same 9K but observed same serial number in all my switches You also using multiple devices, whether all you switch has same serial numbers or unique did you manage to find the solution to have unique serial numbers?
Comment from : @evelab9623

Dear Terry,brbrThanks for the great videos and tips , Could you please give me your opinion if the below Server Specs will be sufficient for me to practice for SD-WAN / SD-Access / ISE & DC ? this is my current maximum budget , also will i need additional storage or the 1TB SSD will be sufficient ?brbrDell R730brDual Processor Intel XEON 2673 V4br20 CPU Core Threads X2 / 25MB CACHE X2brTOTAL 40 CORES 80 vCPU Threadsbr320 GB RAMbr1TB SSD
Comment from : @tarekz6934

I highly recommend SD-Geeks if you are serious about CCIE EI or just learning SD-WAN and SDA at a deep level
Comment from : @mercadam

Hi Terry, congratulations for your great videos! I have a question about cisco 9kv I can provision the 9kv with my DNA Center but when I try to create a Fabric on a box and declear the 9kv as a Control-node the process fails with the message "ip routing is not configured" but it is so Have you encountered this error? Regards
Comment from : @franz1879

Hey Terry, i got everything up and running but having issues adding the switches to DNAC because the 9kv serial numbers are the same Have you run into this and is there a fix or workaround?
Comment from : @hy3rid12

not even a normal Smart account is needed for DNA to be deployed and function as intended especially after the last update (CCIE v11)
Comment from : @mahmoudmanaa630

How can i get that image? CML 251 just includes 1710 but not 1711 yet
Comment from : @UCH6gPNt0lqSA-F_QnBJ0B6A

Thanks Terry for your videosI have been able to build my lab in EVE-NG using the Cat9kv-prd-171001prd7qcow2 image,however, when I tried to assign the corresponding roles for FIAB I get the following error "the Device Role Border Node, Control Plane and Fabric Edge is not supported on this device" Is there a reason why DNAC is complaing about this My device model is Cisco Catalyst 9000 UADP 8 Port Virtual Switch Thanks
Comment from : @sunableflames9365

Hi Terry, from what I know the only way to have the image cat9kv-prd-171001prd7qcow2 is if you have CML 25 Version At the moment is not at Cisco Software Download Center Also the Equipment and Software List for EI v11, for switches has physical C9300 with IOS XE 179 Do you believe when Cisco release the C9kV with IOS XE 1710 it will be sufficient for studying or we still need the physical devices?
Comment from : @anestiskoukis9776

Thanks for this video Terry, its a good way to build a home lab without spending a lot of money
Comment from : @davidmarquez7905

How can i get Cat9kv image for eve ng ?
Comment from : @subhojitdutta8775

What are the specs of the server you are using for DNAC and ISE?
Comment from : @nathanboone9708

what is the DNAC version? I tried many times to install DNAC on my ESXi server but failed, the installation went well, just some of the services won’t coming up, thanks
Comment from : @dengtao6117