Coinco Bill Validator Troubleshooting

Video quality	The size	Download

Information Coinco Bill Validator Troubleshooting

Title	:	Coinco Bill Validator Troubleshooting
Lasting	:	7.46
Date of publication	:
Views	:	62 rb

So my reader is flashing 16 times which indicates a lower housing issue I believeany tips on how to fix that issue or do you have a video on it?
Comment from : @corbithoffmann4498

I just changed the belts on the lower unit (with 5 LED) and now it accepts the bill, but won't give credit I put an older lower unit in to machine and it is working fine, anyone any advise? Thanks
Comment from : @Taronlusin

What is wrong with it if it takes Bill and doesn't dispense any change?
Comment from : @PhillipMitchell-n7i

I have a coinco ba30b that the red light blinks 7 times, what does it mean ?
Comment from : @DillonMunary

I have a question From time to time the validator will take the dollar but stops 1/4 inch short of the sensor to be pushed into the box Is there a way to adjust the motor to feed the bill the last 1/4 inch so it can shove the bill into the box and give credit?
Comment from : @Engineer20

7:07 my validator suddenly just stopped working and started doing this exact thing brReally sucks because I can't afford to buy a new one, since the machine is basically at-cost for my firehouse
Comment from : @flufflepuffle6229

I'm getting a 5 flash code which is sensors I clean them all but it's still doing it
Comment from : @thearoom

Excellent!!!Thanks
Comment from : @deronaldbaggett3828

Bevmax 3800 disable from system May you give me any clue to fix that?
Comment from : @rmcoelho

Is there a way to fix the problem shown at time “6:58” by replacing certain parts If so what parts specifically need replaced?
Comment from : @boredinquarentine9601

Thanks so much for posting this!
Comment from : @highlandcitylibrary5780

We are having problems with ours
Comment from : @13visualz

hi, I have a Mars Validator that accepts one bill, but won't accept any subsequent All the coin chutes are full I'm stumped
Comment from : @kalpatel8537

Hi My coinco BA50B doesn’t make any noise at all…
Comment from : @dm1517

What are you using to test the bill acceptors
Comment from : @marcellusnorwood

how do you program a Mars MS1000 it has 3 blue buttons , wouldn't have a glue which button does what
Comment from : @stuchambers297

I have a freshly rebuilt mag62BB and it will take a 1 dollar bill but not 5 and it will not give credit for the $1 bill Its set for 4pulses per dollar Hate to have to send it back in!
Comment from : @kornfedkustoms1548

I think I picked one up from you a while ago you in Ontario, CA?
Comment from : @PersonalUseChannel

My bill valadater is connected but I noticed it has a plug in not connected idk what the plug in gose to can u please tell me also my bill valadater lights are not working at all im thinking the not plug in is for the lights for the valadater I just don't no at all places hit me back
Comment from : @rigobertodimas8014

Hello, when I put a bill in it goes in but goes up half way, it does not go into the bill holder
Comment from : @roschellTate-pq9vn

Great 🎉 informative video I just started in the vending machine business and my bill validator just stop working and no flash to it I’ve done mostly every in this video you have shown but my machine is only accepting coin do you have a solution
Comment from : @earthlysoundsoftheworld6554

The coinco takes the dollar bill but does not give a dollar credit, any ideas?
Comment from : @michelereese1952

Thank you for the video! My machine makes the correct noise, but the dollar will not go in at all Any suggest?
Comment from : @justinroell3215

Jajajaja pdnj ya se fueron de México
Comment from : @VENDINGMEXICO

Is there a way to reset it if it says reset?
Comment from : @jdmtake1

Lack of nickels causes so much drama
Comment from : @Peilla

Thank You!! Great explanation!
Comment from : @muddywaterbaittackle2172

I have the same validator on my soda machine, on occasion, it will take a bill and not give a credit What would be the cause of that?
Comment from : @Robertapodaca82

Mine is stealing bills! Any ideas? Red light is on it cycles no problem The vending machine doesn’t say 100 when I put in a dollar
Comment from : @Bonejone213

Hi Amy do you sale and have website?
Comment from : @joshreeves7778

You are a great big help I was wondering why my bill acceptor was not working on coins in it will fill when coins and see what happens sounds like it's making all the right noises
Comment from : @garyfagerstrom1274

What if it takes money but wont dispense or doesnt do anything
Comment from : @EpicGames-zx2wb

Hello, That's a great Video and solve alot of problem, But I have a problem getting, 2 Orange blinking (mean "Service Unit") I did the cleaning, but still stay on Orange blinking, and sometime don't take the bill, and I have diagnostic by pressing the reset button, and I see the back plate didn't pop out and stay on it position My second unit getting 2 Red blinking, (mean Clear Bill Path) but I have keep trying to clean and clean , nothing is blocking or dirty, the 2 red blinking light never change and sometime the bill is all the way in and all the way out please help my unit is "vx63s45us01" both same model
Comment from : @fungauyeung1472

My bill validator takes the first dollar fine but when u try to put a second one to purchase something of 2 dollars or more it won't even try to take it
Comment from : @zcl212590

My soda machine somtimes accepts and somtimes don't, does it have to have change in it? The light shows on
Comment from : @shadowcali559

First of all, great video and explanations! The problem I’m having is the last example you gave I was able to get it to take bills a couple times but most times it’s all the way in and back out It sound a little tired and from the research I’ve done it probably needs new belts and a good cleaning brWhat would be the cause of the “all the way in and out” problem you described? Thanks for anything you can help with!
Comment from : @brianalling5483

What if it eats the bull and doesn’t credit it
Comment from : @AbC-hh8vg

What if the motor jumps and shakes when trying to accept the bill
Comment from : @AbC-hh8vg

Hi Amy Great video I have a COINCO BA30BB on a Dixie Narco Sounds like it comes on fine Red light comes on solid Wont take a bill Is it just dirty or dead?
Comment from : @chico253

Mine flashing 7 time not taking money not even trying money
Comment from : @roshanbhakta8903

Mine false 7 time
Comment from : @roshanbhakta8903

Just got the new one in the mail Installed it Takes the bill and gives back a quarter, but won’t dispense the soda Help!
Comment from : @Johnny-ip4mk

Do you buy the old validators that have been replaced? I don’t want to just toss them in the trash Thanks
Comment from : @Johnny-ip4mk

@7:17 what part needs repaired or replaced?
Comment from : @72sarge

Great video New to vending and was in desperate need for a video like this
Comment from : @aeezie

My bill acceptor is not showing a steady light Does have power to it When you open the bill box the light does come back on We do have coins I don't get any flash code either
Comment from : @Chrisp505

Thanks for your video, what did you say that I should do if my validator takes the bill all the in and returns it out (Bill goes all the way in and All the way out)
Comment from : @lilyroseu8828

Mine keeps spitting the bill back out light is solid red But keeps spitting bill out does that mean its bad
Comment from : @stelthcamo357

I bought a vending machine(RS800) it was missing parts I got a new bill validator for it when I turn it on it sounds rightit has a coin mech filled all the way up, doesn't take money but it doesn't have a keypad will that stop it from collecting cash and change?
Comment from : @BusyBeeInspector

I need a service tech my machine is giving out to much money 313 333 6641 I'm in westland Michigan
Comment from : @mikehejaij8660

Plz I need to figure out why my machine is giving out to much money
Comment from : @mikehejaij8660

What if the red light won’t turn on
Comment from : @irmaleon4585

You had stated that the bill acceptor will not accept bills if the coins are not filled But would it still at least take in the bill and throw it back out? Or not even take it all? My quarters are all filled up Just my dimes and nickels ain't But won't even take the bill like you can try but nothing
Comment from : @Chrisp505

Can you help me out , my bill validation is Mag50b it turns on but when the bill goes in, it flashes 3 blinks and the bills goes halfway in and comes out
Comment from : @ProjectAlpha8

I have a American changer with a mag50 b it will take ones each time but it will only take 1 or 2 fives out of about 15
Comment from : @martybates2195

my validator is completely dead makes no noise bill dont go in
Comment from : @MrOvaltine1

Awesome information! Thank you
Comment from : @X32BBFY

Hello! My machine takes the first bill and everything works but after that it does not take more bills The green lights goes off I have to open the machine take the bill and starts working again All the coins are full so I don’t know why it does this :(
Comment from : @JosueDerasJustMe

My bill acceptor has a solid red light on but will not pull a bill in The bill box appears to be functioning correctly but it seems like the acceptor part is not getting power Any suggestions?
Comment from : @joshwright7760

Thanks you I’m new to this and your video help me soo much
Comment from : @Foxnot1

If the machine takes the bill but gets stuck 1/2 way and does not eject or accept the biil What is the problem and how do you fix it?
Comment from : @glosmith7916

Hi thanks for your video , can the coinco validator can reprogram for philippine currency ? Or can you tell me what manufacturer can read or recalibrate a philippine currency thanks
Comment from : @patrickhoff22

Hello, my bill acceptor says that the magazine is removed when it isn't Please help, thank you :)
Comment from : @robertrouillier6319

does the style model of a previous bill validator become a factor in a replacement of a new validator?
Comment from : @DaveThuWave

Guess you didnt get the second reply on the coinpro3 brIs it cheaper to replace or does your company repair?
Comment from : @dhart07170

Hi, Thanksfor your video, i have the same bill acceptor of the video, buy dont turn on I cleaned the sensors and clear of errors in the menu of my machine but still the problem continue My bill acceptor doesn`t on Do you have any suggets? Thanks
Comment from : @UnisalEspera

Thanks for the video Bought a used coca-cola machine and it wouldn't accept bills Cleaned the sensors and it worked for almost a year Now the bill acceptor will start to take a bill and spit it right back out over and over Red LED is constantly on, sensors are clean Guess it's time to get a new validator
Comment from : @SmallEngineRepair